Kukko 15-K Separating Set (3/8" to 2 3/8" OD)
For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.
Description
- 4-parts, the sets contain one separator, one pulling device and a pair of extensions.
- The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
- The wedge-shaped separator jaws are secured underneath the component to be removed.
Advantage
- Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
- Practical package for universal use.
- Complete easy-to-manage package.
OD range: 3/8" to 2 3/8"
Pulling Reach: 2 3/4" to 9 7/8"
How it Works
- The wedge-shaped separator jaws are secured underneath the component to be removed.
- The separator jaws are clamped by tightening the nuts on the side bolts in equal measure.
- The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
- For removal, the tension bolts on the pulling device have to be screwed into the separator.
- Note: The clamping depths can be increased using the extensions included in the set.
Includes:
15-0 Separator
18-0 Pulling Device
19-1-P Extensions (2) for pulling device
Supplied in Kukko I-Boxx
