Kukko 17-0 Bearing Separator (3/8" to 2 3/8" diameter)

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.

Description

• Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
• With quick-clamping pressure spindle.
• The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
• Can pull outer diameters between 3/8" and 2 3/8"

Advantage

• Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle.
• Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
• Almost all components available as replacement parts, time-saving order process thanks to numbering system.

How it works

• The wedge-shaped separator jaws are secured underneath the component to be removed.
• Separate the part by tightening the quick clamping pressure spindle.
• The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
• For removal, the tension bolts on the pulling device series 18 have to be screwed into the separator.
• The part is removed by tightening the spindle against the end of the shaft.

Can be used with alone jaw pullers or 18-0 pulling device.  This unit does not include a pulling device, only the separator.

Typically ships from stock.