Kukko 17-2 Bearing Separator (7/8" to 4 1/2" diameter)
For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.
Description
- Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
- With quick-clamping pressure spindle.
- The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
- Can pull outer diameters between 7/8" and 4 1/2"
Advantage
- Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle.
- Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
How it works
- The wedge-shaped separator jaws are secured underneath the component to be removed.
- Separate the part by tightening the quick clamping pressure spindle.
- The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
- For removal, the tension bolts on the pulling device series 18 have to be screwed into the separator.
- The part is removed by tightening the spindle against the end of the shaft.
Can be used with jaw pullers or 18-2 pulling device or 18-2-B hydraulic pulling device. This unit does not include a pulling device, only the separator.
Typically ships from stock.
