Kukko 18-5-B Hydraulic Pulling Device (includes mechanical pressure screw)
For use with series 15, series 18-AS and series 18-A.
Works with 15-5 separators
Description
- For use with series 15 and 17 separators.
- Hydraulic spindle and mechanical pressure screw.
- Milled thread treated with special coating.
Advantage
- Easy and even pulling for particularly tight parts.
- Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
How it works
- The wedge-shaped separator jaws are secured underneath the component to be removed.
- Screw the spindle body into the cross-beam from below until the spindle body sticks out of the cross-beam by approx. 60 mm.
- Screw the cap onto the spindle body and tighten the side screw.
- Before use, check whether the pressure spindle is screwed far enough out of the cap so that the hydraulic piston is located in the initial position in the hydraulic cylinder.
- For removal, the tension bolts on the pulling device have to be screwed into the separator.
Reach - 8 7/8" to 15 3/4"
G 3/4" thread
20 ton
